#3nylon Invisible Zipper

Invisible zipper     
Spec:#3     
Type of way: closed-end     
Type of slider: drop tear slider     
Type of tape: lace tape or normal woven twill tape     
Color of tape:according to kinds of standard zipper color cards.     
Welcome to customers' designs and colors.     

Zipper types:
Metal zipper
Brass zipper
Aluminium zipper
Nylon zipper
Invisible zipper
CFC zipper
Nyguard zipper

L-type zipper

Waterproof zipper
 

Teeth Material: Nylon
Tape Material:Polyester yarn/Purified cotton 
Teeth Color: YKK, CCC, GCC, Pantone color card, or Customized

Tape Color: YKK, CCC, GCC, Pantone color card, or Customized

MOQ: 5000Yard or 5000pcs
Size: 3#
Usage:  Bags, Garment, Jeans ,Home Textile, Shoes, furniture ,etc. 
Zipper Type:  Long chain ,open end ,closed end, 2 way open end,2 way close end
Length: Customized Length
Slider: Non-Lock/Auto-Lock, Semi Auto-Lock, pin lock slider, one way A/L slider,two way A/L slider,reversible M/L,N/L slider with a lock hole,retainer mavable etc 
Sample:Available
Quality:AAAAA
OEM/ODM Experience: Yes
From:Ningbo,China
Fob Port: Ningbo,China
Payment: Western Union, T/T, Paypal, Escrow

Our zippers are widely used in garments, bags, shoes, etc, with good quality.

5# Nylon Open End Invisible Zipper For Dresses is suitable For Hat, Clothes, Trousers, Bags, Handbags and so on. Welcome to Our Company.

Learn to Sew - Invisible Zipper Application
 

An invisible zipper is inserted in an entirely open seam; the rest of the seam is stitched after the application is completed.

• Use the foot designed for the zipper brand you are using because coil sizes of zippers vary.

• Stitch from top to bottom of zipper.

• Apply any facing after the zipper has been sewn in.

• Before starting, press the zipper as follows, using a synthetic setting: Open zipper; from wrong side, press zipper flat, using point of iron to push coil over so that the two rows of stitching show.

1. Attach the invisible zipper foot to the machine, with the needle lined up with center mark. Place open zipper face-down on right side of fabric as shown. Pin in place with coil on seam line (5/8" in) and top stop ¾" below raw edge of garment (1a). With right-hand groove of foot over coil, stitch zipper until the foot hits the slider (remove pins as you come to them.) Back-tack.

2. To attach the other half of the zipper, pin tape face-down with coil on seam line (5/8" in) and top stop ¾" below raw edge of garment, as before. Make sure that the zipper is not twisted at the bottom. Use the left-hand groove of foot, making sure that the center marking is still lined up with the needle and stitch, as before.

3. Close zipper. Slide zipper foot to the left so that needle is in the outer notch. Pin the seam together below zipper opening. Fold end of zipper out of the way and lower the needle by hand slightly above and to the left of the last stitch.

Stitch seam for about 2", as shown. Pull thread through to one side and tie. Change to regular presser foot and complete the seam.

At zipper end, stitch about 1" of each zipper tape to seam allowance only.