E-6000
is a unique adhesive formulated to meet high-performance industrial requirements.It adheres to more surfaces then virtually any other adhesive.E-6000 has exceptional adhesion to wood,metal,glass,fiberglass,ceramics,masonry and concrete.It also adheres strongly to leather,rubber,vinyl and many plastics.E-6000 maintains its flexible bond in cold temperatures and many be used to bond items subject to vibration.Not for use on Styrofoam.For application that are exposed to sunlight,either paint over E-6000 after it has cured or use UV-6800 adhesive.
CAUTION:Contains perchloroethylene.Harmful if inhaled.May cause dizziness,headache or nausea.Can cause skin and eye irritation.Intentional misuse by deliberately concentrating and inhaling the contents may be harmful.
WARNING:This product contains a chemical known to the state of Califormia to toxic gases.Use only with adequate ventilation.To avoid breathing vapors,open windows and doors or use other means to ensure fresh air entry during application and drying.Avoid prolonged or repeated contact with skin.Wash thoroughly after handling.
First AID:If you experiance difficulty in breathing,leave the area to obtain fresh air.If continuted difficulty is experienced,get medical attention.In case of eye contact,immediately flush with plenty os water for at least 15 minutes.
KEEP OUT OF THE REACH OF CHILDREN
DIRECTIONS
1.Please read all directions before using.
2.Surface should be clean,dry and free of dirt.Roughten surface before each use.
3.Puncture seal in neck of tube using pointer cap.
4.Test small area before fulll use.
5.Best when used bewteen 70°F and 85°F.
6.Cure time increases with lower temperatures.
7.For maximum-strength bond,allow 24-72 hour dry time.
8.For joining non-porous surfaces,apply a thin coat to each surface.Wait 2--10 minutes and press surfaces together.
9.Clean uncured adhesive with acetone or citrus-based solvents.
Cured material may be romoved bu cutting or scraping.
NOTE:E-6000 may damage finished surfaces.Avoid such contact until E-6000 is completely dry.
We company created in 2011. Dongyang Jiesheng Hot Melt Adhesive Co., Ltd. is our factory. And Yiwujiechuang Adhesive Co., Ltd is our company. We are one industry and trade. Since YiWu JieChuang Adhesive Co., Ltd inception, has been to scientific research → Production → Sales → Services as one, for many large, medium and small enterprises to provide high-quality, excellent service a series of hot-melt adhesives products, also received the majority of customer recognition.
There is an independent laboratory. There are some technicians.
We are good at making all kinds of hot melt adhesive. The hot melt adhesive for Baby Diaper&Sanitary Napkin. The hot melt adhesive for shoes industry, including reinforcing and sponge packing. Hot melt adhesive for the medical treatment industry. It for gift box, books type box. And it for Velcro/magic tape. Hot melt adhesive for courier bags and bubble pack. Also, it can be used at craft gift industry, cosmetics. AB glue, 502glue we also have in production.
The hot melt adhesive particle, good performance and the applicability is wide, can be used in sealing box, straws, label, aluminum foil sealing, etc. These products all meet the environmental requirements, meet food grade standard for food.
Our company always adhere to the "create high-quality, service zero distance, " the purpose of "the best products, the most favorable to you" as a slogan, innovation-based, green features, continue to bring benefits to customers, we hard work every day for common tomorrow!
