PE Electro-fusion tape for HDPE corrugated pipe
It is a kind of connecting pipe fitting what is widely used on anti-corrosion, especially on Directly buried pre-insulated pipes field joint. It is made by Polyethylene sheets complex with the electro-fusion wire
Application:
1. District thermal heating system construction,
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Preinsulated bonded pipe system for directly buried hot water networks;
4. Three PE/PP layers with foam jacket insulation pipes connection;
5. Steel pipes anti-corrosion etc.
Performance:
1. Waterproof; High adhesion, good airtightness, corrosion resistant capacity, long service life and convenient operation
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.
| Specification |
| Steel pipe outside diameter (mm) | PE outside casing diameter (mm) | Width(mm) | Tic.mm |
| DN159 | 285 | 600 | 4 |
| DN219 | 315 | 600 | 4 |
| DN273 | 365 | 600 | 4 |
| DN325 | 420 | 600 | 5 |
| DN377 | 500 | 600 | 5 |
| DN426 | 550 | 600 | 6 |
| DN478 | 630 | 600 | 6 |
| DN529 | 655 | 600 | 6 |
| DN630 | 760 | 600 | 8 |
| DN720 | 850 | 600 | 8 |
| DN820 | 960 | 600 | 10 |
| DN920 | 1054 | 600 | 10 |
| DN1020 | 1155 | 600 | 12 |
| DN1220 | 1380 | 600 | 12 |
| Technical Data: |
| All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997 |
| Final Test | Unit | Standard | Test Result | Result |
| Raw material density | g/cm 3 | ≥0.935 | ≤0.961 | PASS |
| Raw material melt flow rate | g/10min | ≤0.50 | 0.46 | PASS |
| Appearance check | / | Inernal and external surfaces is clean and free from other defects. | Pass | PASS |
| Heat reversion | % | ≤3;shall not show any cracks | 0.89,No cracks | PASS |
| Tensile yield strength | Mpa | ≥19 | 20.2 | PASS |
| Elongation at break | % | ≥350 | 656 | PASS |
| Stress crack resistance | h | ≥300 | Pass | PASS
|
Company Info
Qingdao Huashida Machinery Co., Ltd is a professional plastic extrusion production line manufacture since 2003. The factory covers 34000 square meter. Our products such as HDPE pressure pipe for gas or water transmission, structural wall pipe extrusion line, corrugated pipe extrusion line . The products have been exported to Middle East, Russia, Africa. Turkey, Korea.
Our factory locates in Cheng yang Industrial area, Qingdao ,Shandong Province. we have been approved and got certificate ISO90001:2008 by SGS. All the customers are welcome to visit the factory.
If you need more information about this machine. just call us 0086-532-80999083, we can give you consulting service for this machine
1. Our History.
Qingdao Huashida Machinery Co., Ltd was established in 2003 and has focused on plastic pipe production line and joints of plastic pipes and 2PE 3PE pipes for over 14 years, we are a private high-tech enterprises integrated by R&D, manufacturing, selling, service and trading.
We are always concertrating on research and development of plastic extrusion equipments, tightly cooperating with Tsinghua University, Beijing University of chemical technology, South China university of technology and some other colleges and scientific research institutions. Meanwhile, by absorbing advanced technology home and abroad, we have been one of the top manufacturers of plastic extrusion machines in China, especially of PE insulation jacket pipe extrusion line, PE PP sheet extrusion line, and PE hollow wall spiral pipe production line.
2. Our Factory
Qingdao Huashida Machinery Co., Ltd. is located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have tens of years experience in plastic pipe, sheet, and board extrusion lines, and pipe joints and welding tools such as heat shrinkable sleeve, Electro fusion sleeve etc.
3. Our main products
Our main products include as following,
HDPE Jacket Pipe extrusion line
HDPE water supplying pipe extrusion line
PE PP sheet board extrusion line
Heat shrinkable sleeve productionline
Hollow wall spiral pipe production line
Silicon core pipe production line
Plastic welding rod extrusion line
Double wall corrugated pipe production line
Radiation cross-linked PE heat shrinkable sleeve
Electro fusion sleeve
Hand extrusion welder
4. Our products Application.
Our machines make products what are widely used as jacket pipe of PU foam insulation pipe in municipal heating pipe system; Municipal water supplying and drainage pipeline; Oil and gas pipeline; Pipe joints of plastic drainage water pipes, PU foam insulation pipelines, 2PE/3PE oil and gas pipelines;
Besides manufacturing machines, we also make Heat shrinkable sleeves and electro fusion sleeves and plastic welders, which are widely used as pipe joints and sealings of plastic drainage water pipes, PU foam insulation pipelines, 2PE/3PE oil and gas pipelines;
5. Our certificates and Patents
6. Our Purpose and Market
Our purpose is to supply highest cost-effective products and the most suitable solutions to our clients, as well as intimate help and service, on this basis we reach a win-win situation.
For over 14years We have exported to many foreign countries, such as Russia, Iran, Turkey, U. A. E, Sudan, Ukraine, Uzbekistan, Azerbaijan, South Asia, Poland etc.
7. Guarantee and after service
The guarantee period is 12 months from the date of installing, but no more than 14 months from the date of delivery. After this period we are obliged to provide with lifelong service at the expense of Buyer.
During the warranty period we are responsible to provide trouble shootings and help the customer to solve the problems, provide spare parts which are broken, except breakings caused by the Buyer.
We will provide the technical service train the workers from the buyers for free.
We can also send technicians to the buyer's companies abroad for help installation and testing the lines. But the buyer shall pay for the round trip tickets, accommodation, transportation, medicine treatment and insurance of the technicians in foreign countries and some salary accordingly.
