High Pressure Awing Hand Heat Press Machine

  High pressure Awing Hand Heat Press Machine


 

PRODUCT  DISPLAY:

1. The heated plate adopeted by special high precision line-tube;

2. Technology,effectively keep temperature equilibrating and stabilizing;

3. Intelligent 2 in 1 double digital  temperature and time display,the temperature  tolerance is  less than ±2°C;

4. Spiral pressure design, can adjust to the required working pressure randomly;

5. Upgraded lower liatem allows room for T-shirts to be easily, placed into and removed from machine, 6cm adjustble range,process wider products.
6.It is economical and practical.

 
 

please note:Users should operate the machine with ground wire connected for safety!

1.Plug in, turn on the power switch, the power indicator lightened.
2.Hold the handle to push the heating plate away to the right direction.
3.Set the thermostat to the temperature needed (Normally 120-200ºC),set  the timer to the  needed.(Normally 5~20Second)
4.Place the clothes to the main plate, cover the printing paper(please note the right surface of the paper).Press the handle down until reach terminal.
5.When the time come down to over, the buzzer alarms, pull the handle back.
6.If  it  is cold-ripping of the transfer paper, please use blackboard wiper to rub against the whole transfer paper, wait for 5-10 seconds, then rip off the transfer paper. If it is the hot-ripping of the transfer paper, you can rip off immediately after printing.
 

Please Note : Successful print requires right time ,temperature and pressure ,the thickness of  the clothes material ,even the type of printing paper ,all will affect the performance of printing .Any kind of sublimation paper need test before mass production.

 
WARRANTY:


You  can rest assured ,we offer good after-sale

service: the machine enjoy one year warranty ,life-

long maintenance service and Life-long on-line

technical support, and provide free parts when

problems occur within one year not including shipping

cost. we also offer good quality: All the machine of

our factory have been approved by CE.



Payment Terms:

L/C,D/A,D/P,T/T,Western    Union,MoneyGram,Paypal.

30%deposit,the balance 70% will be paid before shipping.


Delivery Detail:

7 days after you confirming order.


^PACKAGING:

The packing will be made according to your requirements. Here

we have 2 usual kinds of safe packing method as below:

1.This Heat press machine will have foam inside, hard carton

outside.

2.This Heat press machine will have PVC bag and foam inside,

wooden case outside. The method above are very safe shipping  

packing method.

Please refer this heat press machine's CBM as below: Packing

size: 80*48*48cm CBM 0.18, CBM 20'Container

163PCS ,40'Container 326PCS ,  Weight 50kg.
 

SHIPPING:

If you order little quantities(below 100KG),you could use DHL,TNT,UPS or other air express company to delivery your goods, delivery time usually 3-4working days, they will send the products your ordered to your address.
 
If you order large quantities, you'd better choose sea delivery.
1,If you have your own shipping agent, then we will contact with them and make sure the shipping details for you .
2, In case of you don't have your own shipping agent, don't worry, we will ask our shipping agent to do all the things for you. 
3. After we ship the machine, we will give you the documents right now.
4. you need to go to your nearest seaport to take your goods, delivery time usually 30-40days. For more details, please contact with us.

MAINTENANCE:

1.Pressure:If the pressure is not big enough,please loose the pressure blocked bolt,and then adjust the pressure nut,when finish the pressure adjustment,fasten the pressure nut.

2.Time:When the time is over,the buzzer does not work or out of order,check the contact of the sensitive switch at the tail of the machine.If it is not proper,adjust it to proper position.

3.Temperature:If the machine has been started for several minutes,there is no heating from heating plate,check the circuit.

4.The machine adopt eccentric bearing,the pressure is not allowed to be adjusted too large,in case cause damage to bearing.

5.If any quality problem please contact our company.

About Our Factory:

Dongguan STC Machinery Co, Ltd were established in 2006, We mainly produce heat press machine and sublimation consumable materials. Our company is well -know  enterprises registered with the approval of the department of the State located in Chang'an Town, Dongguan City is famous for its manufacture. Covering a plant area of more than 4800 square meters. Depending on the ability, excellent quality and good credit, we have established the firm business relationship with many famous companies at home and abroad. Our main market is Euramerican countries, USA, Colombia, British, Norway, Ireland, Greece, Germany, Spain, France, Italy, Ukraine, Australia, South Africa, Arab, Slovakia, Indonesia, Malaysia, Singapore, Thailand, Uganda, Ghana, Morocco, etc.

CONTACT  INFORMATION: