| Prod Model: |
OSA-F149-O |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Orthodontic Material: |
14mm |
| Type: |
Orthodontic Product |
Product Description
Orthodontic Adhesive (hot sale) OSA-F149-OProduct Description
This product is an orthodontic No-mixed direct bonding system. The micromechanical bond to enamel utilizes the acid etch technique and special Composite chemistry.
INSTRUCTIONS
1. Thoroughly cleans the teeth to be bonded with pumice in a rubber cup or bristle brush. Take care to avoid irritating the gingival tissue since slight bleeding may cause contamination that could affect the quality of the bond.
2. Rinse thoroughly with plenty of water. Isolate the teeth and try with the air syringe.
3. Etch enamel and dentin using an etchant and wait for 30-40 seconds, then rinse thoroughly and air-dry. The etched areas should appear chalky-white. If not, reapply etchant for an additional 30 seconds.
4. Brush a thin coat of the Primer to each etched and dried tooth surface to be bonded. The thin Primer coat should be confined to the etched area. Do not dispense Primer prematurely in order to avoid evaporation.
NOTE
When using no-mixed bonding systems, bracket bases should closely confirm to the tooth surface to be bonded. Adjust bracket base as needed.
5. Brush a thin coat of Primer on the underside of the bracket base. Do not contaminate primed surface of bracket base. Primed surfaces should not be exposed to air for more than 10 minutes.
6. Apply a thin layer of the paste to the underside of the bracket base and immediately place bracket on tooth with a slight rotating motion. Immediately position the bracket to desired angulation and press firmly to insure paste is in a thin uniform layer. All adjustments to brackets must be made within 20 seconds or prior to gelation of paste. Remove excess adhesive from the periphery of the bracket base after the brackets are in place. Keep teeth isolated for appropriately 3 minutes. Arch wires may be places 7 minutes after bracket is placed on the tooth.
7. To re-bond a lost bracket, all adhesives must be removed from the tooth, and then follow steps 1-7.
STORAGE
Store at room temperature (5° C-22° C/41° F-72° F). See individual component labels for specific expiration dates. After using it, store the rest at the refrigerator for next time's use.
CAUTIONS
Unpolymerized resins may cause skin sensitization in susceptible persons. In case of contact with the skin, wash thoroughly with soap and water. Phosphoric acid is a severe eye irritant. In case of eye contact flush with plenty of water and medical attention. Avoid contact with skin and mucous membrane with phosphoric acid. In case of contact, flush immediately with water.
WARRANTY
1. PRIMER must smear on the bottom of bracket and the surface of teeth.
2. Don't pull the PASTE from syringe direct with the PRIMER. Plastic stick must be used to take PASTE smear on the bottom of bracket.
3. PRIMER used only very tiny quantity; Just about 14mg is enough.
Foshan Osakadent Medical Instruments Co., Ltd., as a leading professional dental manufacturer and exporter, has been engaged in the dental field for over 10 years. We focus on supplying quality and competitive dental products. Our slogan "Best Quality, Best Service, Competitive price" has been fully executed throughout our daily work. Therefore OSAKA products are highly appreciated by our distributors and end-users home and abroad.
Our company is a professional manufacturer and wholesaler in the dental field, such as high and low-speed turbine, diamond bur, endo file, whitening machine, curing light and other dental accessories. In addition, we also distribute advanced high-quality dental instrument, equipment and materials. Main brands are follows: Densply, 3M, Kerr, TPC, GC, Kuraray, RSK, Mani, KAVO, NSK, SAESHIN, Woodpecker, ect. Meanwhile, we offer about thousands of goods with excellent quality and competitive price, such as fiber optic scaler, consumable products, autoclave, whitening machine, dental unit accessories, implant machine, air compressor, bur, mounited stone, amalgamator and amalgamator capsule, grinding machine, lab equipments etc.
Dentistry is developing very fast nowadays, thus, as professional dental equipment supplier, we insist on researching and developing new technology and new treatment method on dental equipment, so as to largely reduce the pain of patients and the burden of doctors. New dental equipment is possible to become the best-selling dentistry products in future, being also the largest potential business opportunities. We will provide the latest product of dental industry at the top speed to ensure the customers to acquire competitive advantage. For any new dental equipment, please focus on our website
All the dental equipment we offer have passed the European market access of CE certification. Besides CE certification, we have obtained many other standard certification such as ISO, etc., which guarantees the quality of the dental equipment we provide. With high quality and competitive prices, our dental equipment are designed according to ergonomics and hygienic standards, being safe and convenient to use. Please trust us and feel free to Contact us.
Besides our close attention to latest products involved in global market, new technology and material adopted, we invest more on R&D, updating and extending our products lines to make sure our products more than customers.
