T-Shirt Screen Printing Ink/ Silk Printing Silicone Ink for Textile Printing Ink

Silicone ink Appliation                                                 :
Suitable for most natural and synthetic fabrics, including elastic fabric
   Jerseys
   Hats & caps
   Sweaters
   Jackets
   Gloves
   Sleepwear
   Pants & shorts
   Bathing suits
   Undergarments
   Uniforms
   Shirts
   Sweatshirts

Silicone Ink features                                                  :

 Good hand feel: Soft, non-sticky handle with no blocking problem upon folding
  Excellent durability: Wash- and weather-resistance
  Color fastness: No color migration, even between red and white
  Improved fashion appearance: Semi-gloss finish with no creasing
  High elongation: Suitable for fabric with Lycra content
  Fast cure: Skin cures in 3 to 6 seconds at skin temperatures between 100-130°C
  Operation-friendly: Suitable viscosity and thixotropy for manual screen printing
  Easily pigmented: A base gel / catalyst system of less than 10 percent
  Environmentally sound: Does not contain organotin, phthalate, formaldehyde, PVC or solvent
  Reduced total cost of use: Lower process time and better coverage
  Low shrinkage(<0.1%)  
  Excellent performance of anti-slip
  Good skid-proof effect and high adhesive strength
  Wearproof, wash-resistant, high temperature resistant
  Non-toxic and odorless, food grade silicone
  High transparency and good tear-strength
  Wearproof, washable, high temperature resistance
  Three-dimensional level

Silicone Ink Datasheet                                 :

 (ps: the hardness and viscosity is adjustable)

Silicone Ink Prepare Methods                                  :
Mixed Color master batch: Using it when needing various colors.
For ink to be White :add 5% -10% of White color paste to base A part mixed well.
Same process as for ink to blue and Red, yellow ink!
For ink to be black :  add 5% of black color paste to base A part mixed well.
For ink to be grey:  add 3% of black color paste and 5% of white color paste to base A part mixed well

Silicone Ink Mix process                                          :
1.   Mixed 10% CATATLYST curing agent B Part into small amount of silicone ink A Part(90%). 
2.   The curing agent should be mixed very well, Otherwise,some parts won't be cured.
3.   could use thinner for decrease the viscosity,over 15% of thinner, the abrasiveness, durability and adhesion force will be reduce. There tested before production is required.

Silicone Ink Drying Methods                                      :
1. According to different thickness of silicone ink, the curing time is different. Normal situation for mixing Part A: Part B =10:1 curing time is 50seconds with the temperature of 150degree (polyaddition process). 
2. When the room temperature is above 25degree (humidity 50%), room temperature cure can be carried out under summer condition
3.Color master batch: Using it when needing various colors.