beige color No peculiar smell nail free glue for Aluminum edge
Can nail-free adhesive replace screws?
Nail-free adhesive can do what screws do. There is no need for hammers and it does not do any harms to the wall or any parts to be bonded. What' more, it is water proof, corrosion proof and heat/cold-proof.
Introduction:
Kastar nail-free adhesive is so high bonding strength that it can function as nails. Without drilling holes, it can bond timber, plasterboard, medium-density fireboard, stone, cement, tile, metal, plastic, and rubber.
Characteristics:
1.Super adhesion, high strength
2.Great flexible, not brittle
3.Wide in application
4.Unsinkable, fillable, and paintable
5.Weatherable, waterproof
6.Non-toxic, no odor and eco-friendly, free of toluene, meeting the standards of GB18583
Uses:
1.The surfaces to be bonded should be clean, free from dust grease or oil.
2.Cut an opening in the mouth of the tube, matched with the attached plastic pipe. Then squeeze the adhesive out with a sealant gun.
Method 1 (applicable for light objects and the bonding part bearing weak force)
Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Push the part with adhesive toward the other and then remove it so that there is an opening between them for the solvent to volatilize. Wait for 2-5 minutes and then compress the two parts against each other.
Method 2 (applicable for heavy objects)
Coat one part to be bonded with several "zigzag" patterns st the intervals of 40 cm. Clamp or screw the two parts together until the glue dries (in about 24 hours). Then remove the clam of the screw. The bonded parts can be adjusted if necessary in 20 minutes. The initial curing time is 24 hours and the adhesive will work and reaches its best effects in 48 hours.
Precautions:
1.dequate local exhaust ventilation is required and the product must be kept off children.
2.In the event of its touch of skin or eyes, flush with flesh water or see a physician.
3.Store in dry, shaded, and ventilated condition away from the sources of heat and ignition.
4.In the event of mass use, make a pre-test to avoid the negative effect of mal-operation.
Shelf Time:
18 months
Technical Data Sheet:
| Ingredient | Synthetic rubber |
| Color | Beige,white |
| Specific gravity | 1.3g/ml |
| Solid content | 75% |
| Viscosity | 300,000 Pa.s |
| Superior adhesion | 30-40kg/m² |
| Adapted temperature | -30°- +100° |
| Application Temperature | -20°-+40° |
| Completely cured time | 12-24 hours |
| Packing | 300ml/tube |
| Shelf life | 18 months |
Thank you for your visiting. Any questions, please feel free to contact us. I am Ruiqiang Wu here.
Kater Adhesives Industrial Co., Ltd is a group company which has been engaged in the development, production and sale of silicone sealant, acrylic sealant, gasket maker, polyurethane sealant and etc.
Kater Silicones is one of the largest Silicone Sealant factories in China (USD 38 million sales turnover per annum with over 680 employees) located in Foshan and Yantai. Currently, we have close to 25% market share in China with a planned output of 40.000 tons of silicone sealants this year (2011). We do offer all sorts of Silicone sealant products (one part and two part sealants in Cartridge, Foil, Tube or Drum for refillers all over the world. )
Kater Acrylic Sealant was elected as "Satisfied Products of China Consumers", "Qualified Products of Shandong Technology Supervision Bureau", and "Gold Award of 98 Patent Market & New Technology Expo". We are Member Certificate of China Adhesive Agent Industrial Association in 2000, and our acrylic sealants are Quality Checking Exemption Products in China.
Kater Polyurethane Sealant has been engaged in development, production and sales of Polyurethane sealant, and we passed the "ISO/TS16949: 2002". Our company owns two fully automatic sealant production lines which were imported from Germany and Italy with an annual production capacity over 18000 tons. Additionally, we have established a top-ranking Laboratory and Provincial-Level Enterprise Technology Center, and also have a highly qualified professional team consisting of professors, middle aged and young specialists, possessing strong product development, innovation and marketing service capability.
Kater are producing materials for normal weather sealing and structural glazing application according to the DIN ISO 9001norming. Our Sealants do meet ISO9001 Standard, British Standard, American Standard and China Standard. We are doing many private label products for big multi-national companies and factories.
We aim to expanding brand and quality to over the quality.
Welcome you to choose Ceramic Tile Sealer to raise your profit.
Welcome to visit our adhesive office website: http://www.kater-silicones.com/
Ceramic Tile Sealer office website: http://ceramictilesealer.com/
