Categories
Categories
Price: | Negotiable/Ton |
---|---|
Min Order: | 2/Ton |
Pay Type: | L/C,T/T,D/P,Western Union,Paypal |
Prod Model: | 1.2080/cr12/d3 |
---|---|
Certificate: | ISO 9001/SGS/TUV/BV |
Standard: | GB |
Composition: | Ferrous Steel Scrap |
Special Use: | Mold Steel |
Application: | Die Steel Bar |
Type: | Mold Steel |
Technique: | Forged/Hot Rolled |
Shape: | Round |
Surface Treatment: | Milled/Machined/Black Surface |
Equivalent grades | GB | DIN | AISI | JIS | - | |||||
Cr12 | 1.2080 | D3 | SKD1 | - | ||||||
Chemical Composition | C | Si | Mn | Cr | P | S | - | - | - | - |
1.90-2.20 | 0.10-0.40 | 0.15-0.45 | 11.00-12.00 | ≤0.03 | ≤0.03 | - | - | - | - | |
Available size | Round Bar | Diameter | Length | |||||||
60-800mm | 2000-6000mm | |||||||||
Flat Bar | Thickness | Width | Length | |||||||
25-400mm | 200-800mm | 2000-6000mm | ||||||||
Surface condition | Black surface/ Grinded/ Machined | |||||||||
Annealed hardness | HB250MAX | |||||||||
Characteristics | High strength, good hardenability High abrasive resistance and small shock load Very high wear resistance against abrasive and adhesive wear Medium toughness Dimensionally stable High compressive strength | |||||||||
Applications | High performance cutting tools for steet upto 4mm thickness,trimming dies,blanking dies for paper and plastic ,shear blades for cutting light gauge materialthreat rolling dies,drawing,deep drawing,pressure pads and highly wear-resistant plastic moulds | |||||||||
Heat Treatment | Along with the furnace cooling after(850~870) °C× (3~4)h . (740~760)°C×(4~5)h,out air cold Low impact toughness and should avoid tempering at about 950~1150°C |